Installation Video

For additional help, you can also watch this installation video shared by one of our KKS Supercar customers:

Customer Installation Video:

https://youtu.be/qnxx4rTrb-c

Please note that vehicle configuration and module version may vary slightly. Always follow the labels and wiring supplied with your own KKS Module.

Before Installation

• The KKS Module uses the OEM microphone.
• Always follow the DIP switch settings printed on your specific module or packaging.

1. Connect the Main 48-Pin Harness

1. Remove the original 48-pin connector from the rear of the factory head unit.
2. Plug the KKS Module 48-pin connector into the factory head unit.
3. Plug the original vehicle 48-pin connector into the female 48-pin connector on the KKS Module harness.

2. Transfer the MOST Fibre Optic Cable

If the original 48-pin connector has a fibre optic cable:

1. Remove the fibre optic insert from the original connector.
2. Transfer it to the KKS Module connector marked:

CONNECT TO HEAD UNIT

This step is important. If the fibre optic cable is not transferred, the factory audio system may not work correctly.