⚠️ Important Notes

• Turn off Windows Defender or antivirus before running the software.

  It may show a “threat detected” message — this is a false positive caused by the software’s security lock system.

• If Windows Defender automatically deletes or quarantines any files, go to

  Windows Security → Virus & Threat Protection → Protection History → Restore

  to undo the action and restore the deleted files.

• If you’re concerned about system safety, you can use a secondary (dummy) laptop for this software.

🔹 Step 1. Plug in the USB

Insert the USB stick into your laptop. Once opened, you’ll see a machine code displayed on screen.

📩 Send that machine code to us, and we’ll reply with your registration code.

After you receive it, enter the registration code — the software will then unlock and run normally.

🔹 Step 2. Device Binding

The USB is locked to the device you register it on.

• Each USB can be rebound up to 2 times per year (for example, if you change laptops).
• To avoid using up rebinds, it’s best to set up one dedicated laptop for this software.
• You can always remote into that dedicated laptop (e.g., via AnyDesk or ToDesk) to use the software from anywhere — this does not count as a rebind.

🔹 Step 3. Recommended Setup

Use the USB on a stable, dedicated laptop 💻 for best performance.

Avoid removing or copying files from the USB, as the software is locked to the device.